Leader Chuck

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-05-A4

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M40 X 1

5mm with a Ø12mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width10mm. Also included are 3xM6 mounting bolts on a 96

0mm PCD

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-05-A4

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M40 X 1,5mm with a Ø12mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width10mm. Also included are 3xM6 mounting bolts on a 96,0mm PCD

Chuck Size Ø135mm
2 of Jaws
Through Hole Ø32mm
Jaw Stroke Ø18,0mm
Ø110mmh7
Maximum Speed 4200rpm
Wedge Stroke 12mm
Maximum Clamping Diameter 135mm
Minimum Clamping Diameter 6mm
Maximum Drawbar Pull 10,4kN (1060kgf)
Maximum Clamping Force 11,4kN (1165kgf)
Moment of Inertia 0,018kg-m²
Maximum Pressure 1,6MPa (16Kg/cm²)
Weight 7.7Kg

Matching Cylinder TH-536
Matching Hard Jaws HJ05
Matching Soft Jaws SJ05
Matching T Nuts TN1-04

Download Document