Leader Chuck

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-08-A5

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M60 X 2

0mm with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm. Also included are 6xM10 mounting bolts on a 104

8mm PCD

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-08-A5

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M60 X 2,0mm with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm. Also included are 6xM10 mounting bolts on a 104,8mm PCD

Chuck Size Ø210mm
2 of Jaws
Through Hole Ø48mm
Jaw Stroke Ø32,0mm
A5
Maximum Speed 3000rpm
Wedge Stroke 20mm
Maximum Clamping Diameter 210mm
Minimum Clamping Diameter 10mm
Maximum Drawbar Pull 22,8kN (2330kgf)
Maximum Clamping Force 27,0kN (2750kgf)
Moment of Inertia 0,167kg-m²
Maximum Pressure 1,7MPa (17Kg/cm²)
Weight 24.9Kg

Matching Cylinder TH-852
Matching Hard Jaws HJ08
Matching Soft Jaws SJ08
Matching T Nuts TN1-08

Download Document