Leader Chuck

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-10-A8

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M85 X 2

0mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width 16mm. Also included are 3xM8 mounting bolts on a 190

0mm PCD

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-10-A8

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M85 X 2,0mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width 16mm. Also included are 3xM8 mounting bolts on a 190,0mm PCD

Chuck Size Ø254mm
2 of Jaws
Through Hole Ø70mm
Jaw Stroke Ø37,5mm
A8
Maximum Speed 2400rpm
Wedge Stroke 25mm
Maximum Clamping Diameter 254mm
Minimum Clamping Diameter 18mm
Maximum Drawbar Pull 31,8kN (3240kgf)
Maximum Clamping Force 37,2kN (3800kgf)
Moment of Inertia 0,338kg-m²
Maximum Pressure 1,8MPa (18Kg/cm²)
Weight 42.5Kg

Matching Cylinder TH-1075
Matching Hard Jaws HJ10
Matching Soft Jaws SJ10
Matching T Nuts TN1-10

Download Document