Leader Chuck

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M100 X 2

0mm with a Ø50mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M16 SHCS on 30mm centres. T nut slot width 21mm. Also included are 6xM16 mounting bolts on a 171

4mm PCD

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M100 X 2,0mm with a Ø50mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M16 SHCS on 30mm centres. T nut slot width 21mm. Also included are 6xM16 mounting bolts on a 171,4mm PCD

Chuck Size Ø304mm
2 of Jaws
Through Hole Ø91mm
Jaw Stroke Ø45,0mm
Ø220mmh6
Maximum Speed 2100rpm
Wedge Stroke 30mm
Maximum Clamping Diameter 304mm
Minimum Clamping Diameter 30mm
Maximum Drawbar Pull 43,1kN (4400kgf)
Maximum Clamping Force 50,0kN (5100kgf)
Moment of Inertia0,8kg-m²
Maximum Pressure 1,9MPa (19Kg/cm²)
Weight 60.0Kg

Matching Cylinder TH-1291
Matching Hard Jaws HJ12H
Matching Soft Jaws SJ12H
Matching T Nuts TN1-12

Download Document