Leader Chuck

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-15-A8

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M130 X 2

0mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 23 or 25.5mm. Also included are 6xM16 mounting bolts on a 171

4mm PCD

EXTRA LONG JAW STROKE POWER CHUCK AG-2L-15-A8

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M130 X 2,0mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 23 or 25.5mm. Also included are 6xM16 mounting bolts on a 171,4mm PCD

Chuck Size Ø385mm
2 of Jaws
Through Hole Ø120mm
Jaw Stroke 52,0mm
A8
Maximum Speed 1600rpm
Wedge Stroke 35mm
Maximum Clamping Diameter 385mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 56,2kN (5730kgf)
Maximum Clamping Force 53,0kN (5400kgf)
Moment of Inertia 2,52kg-m²
Maximum Pressure 1,7MPa (17Kg/cm²)
Weight 147Kg

Matching Cylinder TH-1512
Matching Hard Jaws HJ15H & HJ15P
Matching Soft Jaws SJ15H & SJ15P
Matching T Nuts TN1-15

Download Document