Leader Chuck

FOUR-JAW TWO MOTION TYPE POWER CHUCK AG-4T-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two + two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M16 X 2

0mm with a Ø90mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm. T nut slot width 16mm . Also included are 4xM16 mounting bolts on a 171

4mm PCD

FOUR-JAW TWO MOTION TYPE POWER CHUCK AG-4T-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two + two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M16 X 2,0mm with a Ø90mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm. T nut slot width 16mm . Also included are 4xM16 mounting bolts on a 171,4mm PCD

Chuck Size Ø304mm
2+2 of Jaws
Through Hole Ø0mm
Jaw Stroke 16mm
Ø220mmh6
Maximum Speed 1500rpm
Wedge Stroke 20mm
Maximum Clamping Diameter 304mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 21,6kN (2200kgf)
Maximum Clamping Force 79,4N (8100kgf)
Moment of Inertia 0,66kg-m²
Maximum Pressure 2,2MPa (22,0Kg/cm²)
Weight 57.6Kg

Matching Cylinder RD-125(N)
Matching Hard Jaws HJ10
Matching Soft Jaws SJ10
Matching T Nuts TN1-10