Leader Chuck

FOUR-JAW TWO MOTION TYPE POWER CHUCK AG-4T-15

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two + two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2

5mm with a Ø125mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm. T nut slot width 14mm . Also included are 4x M20 mounting bolts on a 235

0mm PCD

FOUR-JAW TWO MOTION TYPE POWER CHUCK AG-4T-15

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two + two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2,5mm with a Ø125mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm. T nut slot width 14mm . Also included are 4x M20 mounting bolts on a 235,0mm PCD

Chuck Size Ø381mm
2+2 of Jaws
Through Hole Ø0mm
Jaw Stroke 19,6mm
Ø300mmh6
Maximum Speed 1200rpm
Wedge Stroke 25mm
Maximum Clamping Diameter 381mm
Minimum Clamping Diameter 60mm
Maximum Drawbar Pull 27,2kN (2780kgf)
Maximum Clamping Force 105,3N (10750kgf)
Moment of Inertia 2,25kg-m²
Maximum Pressure 2,7MPa (27,0Kg/cm²)
Weight 118.3Kg

Matching Cylinder RD-125(N)
Matching Hard Jaws HJ12H
Matching Soft Jaws SJ12H
Matching T Nuts TN1-12