Leader Chuck

PULL LOCK POWER CHUCK AG-3U-06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M35 X 1

5mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M10 SHCS on 0mm. T nut slot width N/A. Also included are 6x M10 mounting bolts on a 104

8mm PCD

PULL LOCK POWER CHUCK AG-3U-06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M35 X 1,5mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M10 SHCS on 0mm. T nut slot width N/A. Also included are 6x M10 mounting bolts on a 104,8mm PCD

Chuck Size Ø168mm
3 of Jaws
Through Hole Ø42mm
Jaw Stroke Ø5,0mm
Ø140mmh6
Maximum Speed 7000rpm
Wedge Stroke 10mm
Maximum Clamping Diameter 105mm
Minimum Clamping Diameter 20mm
Maximum Drawbar Pull 17,9kN (1830kgf)
Maximum Clamping Force 57,8kN (5900kgf)
Moment of Inertia 0,055kg-m²
Maximum Pressure 2,6MPa (26Kg/cm²)
Weight 14.7Kg

Matching Cylinder RK-100(N)
Matching Hard Jaws N/A
Matching Soft Jaws SJ3U-206
Matching T Nuts N/A