Leader Chuck

PULL LOCK POWER CHUCK AG-3U-208K

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a threejaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M35 X 1

5mm with a Ø80mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 0mm. T nut slot width N/A. Also included are 3x M12 mounting bolts on a 133

4mm PCD

PULL LOCK POWER CHUCK AG-3U-208K

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a threejaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M35 X 1,5mm with a Ø80mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 0mm. T nut slot width N/A. Also included are 3x M12 mounting bolts on a 133,4mm PCD

Chuck Size Ø210mm
3 of Jaws
Through Hole Ø52mm
Jaw Stroke Ø5,0mm
Ø170mmh6
Maximum Speed 6000rpm
Wedge Stroke 10mm
Maximum Clamping Diameter 132mm
Minimum Clamping Diameter 25mm
Maximum Drawbar Pull 25,0kN (2550kgf)
Maximum Clamping Force 80,0kN (8150kgf)
Moment of Inertia 0,14kg-m²
Maximum Pressure 2,2MPa (22Kg/cm²)
Weight 25.8Kg

Matching Cylinder RL-125 or RL-A125(N)
Matching Hard Jaws N/A
Matching Soft Jaws SJ3U-208
Matching T Nuts N/A