Leader Chuck

PULL LOCK POWER CHUCK AG-3U-210

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M68 X 2

0mm with a Ø105mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M14 SHCS on 0mm. T nut slot width N/A. Also included are 3x M16 mounting bolts on a 171

4mm PCD

PULL LOCK POWER CHUCK AG-3U-210

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M68 X 2,0mm with a Ø105mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M14 SHCS on 0mm. T nut slot width N/A. Also included are 3x M16 mounting bolts on a 171,4mm PCD

Chuck Size Ø254mm
3 of Jaws
Through Hole Ø75mm
Jaw Stroke Ø5,0mm
Ø220mmh6
Maximum Speed 4500rpm
Wedge Stroke 10mm
Maximum Clamping Diameter 163mm
Minimum Clamping Diameter 34mm
Maximum Drawbar Pull 35,0kN (3570kgf)
Maximum Clamping Force 100,7kN (10100kgf)
Moment of Inertia 0,36kg-m²
Maximum Pressure 3,1MPa (31Kg/cm²)
Weight 43.5Kg

Matching Cylinder RK-125(N)
Matching Hard Jaws N/A
Matching Soft Jaws SJ3U-210
Matching T Nuts N/A