Leader Chuck

QUICK JAW-CHANGE CHUCK AG-3Q-10

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M90 X 2

0mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width16mm. Also included are 3xM16 mounting bolts on a 171

5mm PCD

QUICK JAW-CHANGE CHUCK AG-3Q-10

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M90 X 2,0mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width16mm. Also included are 3xM16 mounting bolts on a 171,5mm PCD

Chuck Size Ø254mm
3 of Jaws
Through Hole Ø86mm
Jaw Stroke Ø8,8mm
Ø220mmh6
Maximum Speed 4500rpm
Wedge Stroke 19mm
Maximum Clamping Diameter 254mm
Minimum Clamping Diameter 41mm
Maximum Drawbar Pull 60,0kN (6118kgf)
Maximum Clamping Force 135,0kN (13765kgf)
Moment of Inertia 0,41kg-m²
Maximum Pressure 2,8MPa (28Kg/cm²)
Weight 44.0Kg

Matching Cylinder TK-1287
Matching Hard Jaws HJ10
Matching Soft Jaws SJ10
Matching T Nuts TN1-10

Download Document