Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-2P-05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M12 X 1

75mm with a Ø28mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width 10mm . Also included are 4xM8 mounting bolts on a 100

0mm PCD

STANDARD JAW STROKE POWER CHUCK AG-2P-05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M12 X 1,75mm with a Ø28mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width 10mm . Also included are 4xM8 mounting bolts on a 100,0mm PCD

Chuck Size Ø135mm
2 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø6,4mm
Ø80mmh6
Maximum Speed 5500rpm
Wedge Stroke 15mm
Maximum Clamping Diameter 135mm
Minimum Clamping Diameter 14mm
Maximum Drawbar Pull 5,3kN (540kgf)
Maximum Clamping Force 16,7kN (1700kgf)
Moment of Inertia 0,02kg-m²
Maximum Pressure 1,5MPa (15Kg/cm²)
Weight 5.8Kg

Matching Cylinder RK-75(N) or RA-130
Matching Hard Jaws HJ05
Matching Soft Jaws SJ04
Matching T Nuts TN1-04

Download Document