Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-2P-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2

5mm with a Ø38mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm . Also included are 6xM12 mounting bolts on a 133

4mm PCD

STANDARD JAW STROKE POWER CHUCK AG-2P-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2,5mm with a Ø38mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm . Also included are 6xM12 mounting bolts on a 133,4mm PCD

Chuck Size Ø210mm
2 of Jaws
Through Hole Ø25mm
Jaw Stroke Ø8,8mm
Ø170mmh6
Maximum Speed 4750rpm
Wedge Stroke 21mm
Maximum Clamping Diameter 210mm
Minimum Clamping Diameter 17mm
Maximum Drawbar Pull 16,5kN (1680kgf)
Maximum Clamping Force 50,0kN (5100kgf)
Moment of Inertia 0,13kg-m²
Maximum Pressure 1,5MPa (15Kg/cm²)
Weight 22.0Kg

Matching Cylinder RK-125(N) or RA-220
Matching Hard Jaws HJ08
Matching Soft Jaws SJ08
Matching T Nuts TN1-08

Download Document