Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-2P-10-A06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2

5mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width 16mm . Also included are 6xM12 mounting bolts on a 133

4mm PCD

STANDARD JAW STROKE POWER CHUCK AG-2P-10-A06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2,5mm with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 30mm centres. T nut slot width 16mm . Also included are 6xM12 mounting bolts on a 133,4mm PCD

Chuck Size Ø254mm
2 of Jaws
Through Hole Ø34mm
Jaw Stroke Ø8,8mm
A6
Maximum Speed 4000rpm
Wedge Stroke 25mm
Maximum Clamping Diameter 254mm
Minimum Clamping Diameter 22mm
Maximum Drawbar Pull 19,4kN (1980kgf)
Maximum Clamping Force 71,5N (7300kgf)
Moment of Inertia 0,29kg-m²
Maximum Pressure 1,8MPa (18Kg/cm²)
Weight 42.0Kg

Matching Cylinder RK-125(N) or RA-220
Matching Hard Jaws HJ10
Matching Soft Jaws SJ10
Matching T Nuts TN1-10

Download Document