Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-2P-15-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M30 X 2

5mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 25.5mm . Also included are 3xM10 mounting bolts on a 260

0mm PCD

STANDARD JAW STROKE POWER CHUCK AG-2P-15-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M30 X 2,5mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 25.5mm . Also included are 3xM10 mounting bolts on a 260,0mm PCD

Chuck Size Ø381mm
2 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø16,0mm
A11
Maximum Speed 3000rpm
Wedge Stroke 35mm
Maximum Clamping Diameter 381mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 54,9kN (5600kgf)
Maximum Clamping Force 164,6kN (16800kgf)
Moment of Inertia 1,70kg-m²
Maximum Pressure 1,9MPa (19Kg/cm²))
Weight 103.0Kg

Matching Cylinder RK-200(N)
Matching Hard Jaws HJ15P
Matching Soft Jaws SJ15P
Matching T Nuts TN2-15

Download Document