Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-3P-04

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M10 X 1

5mm with a Ø26mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width10mm. Also included are 3xM8 mounting bolts on a 80

0mm PCD

STANDARD JAW STROKE POWER CHUCK AG-3P-04

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M10 X 1,5mm with a Ø26mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width10mm. Also included are 3xM8 mounting bolts on a 80,0mm PCD

Chuck Size Ø110mm
3 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø6,4mm
Adaptor Recess Mount Ø60mmh6
Maximum Speed 6000rpm
Wedge Stroke 15mm
Maximum Clamping Diameter 110mm
Minimum Clamping Diameter 5mm
Maximum Drawbar Pull 8,1kN (830kgf)
Maximum Clamping Force 22,5kN (2300kgf)
Moment of Inertia 0,01kg-m²
Maximum Pressure 2,2MPa (22Kg/cm²)
Weight 4.1Kg

Matching Cylinder RK-75(N) or RA-130
Matching Hard Jaws HJ05
Matching Soft Jaws SJ04
Matching T Nuts TN1-04

Download Document