Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-3P-06-A5

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M16 X 2

0mm with a Ø34mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M10 SHCS on 20mm centres. T nut slot width12mm. Also included are 3xM6 mounting bolts on a 116

0mm PCD

STANDARD JAW STROKE POWER CHUCK AG-3P-06-A5

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M16 X 2,0mm with a Ø34mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M10 SHCS on 20mm centres. T nut slot width12mm. Also included are 3xM6 mounting bolts on a 116,0mm PCD

Chuck Size Ø168mm
3 of Jaws
Through Hole Ø21mm
Jaw Stroke Ø8,5mm
A5
Maximum Speed 5250rpm
Wedge Stroke 20mm
Maximum Clamping Diameter 165mm
Minimum Clamping Diameter 14mm
Maximum Drawbar Pull 17,9kN (1830kgf)
Maximum Clamping Force 52,4kN (5350kgf)
Moment of Inertia 0,05kg-m²
Maximum Pressure 2,6MPa (26Kg/cm²)
Weight 14.0Kg

Matching Cylinder RK-100(N) or RA-170
Matching Hard Jaws HJ06
Matching Soft Jaws SJ06
Matching T Nuts TN1-06

Download Document