Leader Chuck

STANDARD JAW STROKE POWER CHUCK AG-3P-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2

5mm with a Ø50mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M16 or M14 SHCS on 30mm centres. T nut slot width 21 or 18mm. Also included are 6xM16 mounting bolts on a 171

4mm PCD

STANDARD JAW STROKE POWER CHUCK AG-3P-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 X 2,5mm with a Ø50mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M16 or M14 SHCS on 30mm centres. T nut slot width 21 or 18mm. Also included are 6xM16 mounting bolts on a 171,4mm PCD

Chuck Size Ø304mm
3 of Jaws
Through Hole Ø34mm
Jaw Stroke Ø10,5mm
Ø220mmh6
Maximum Speed 3360rpm
Wedge Stroke 30mm
Maximum Clamping Diameter 304mm
Minimum Clamping Diameter 22mm
Maximum Drawbar Pull 41,0kN (4180kgf)
Maximum Clamping Force 155,8kN (15900kgf)
Moment of Inertia 0,73kg-m²
Maximum Pressure 2,6MPa (26Kg/cm²)
Weight 59.0Kg

Matching Cylinder RK-150(N) or RA-270
Matching Hard Jaws HJ12H or HJ12P
Matching Soft Jaws SJ12H or SJ12P
Matching T Nuts TN1-12 or TN2-12

Download Document