Leader Chuck

THROUGH-HOLE POWER CHUCK AG-2H-05-A04

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M40 X 1

5MM with a Ø12mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width 10mm. Also included are 3x M6 mounting bolts on a 96

0mm PCD.

THROUGH-HOLE POWER CHUCK AG-2H-05-A04

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M40 X 1,5MM with a Ø12mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M8 SHCS on 14mm centres. T nut slot width 10mm. Also included are 3x M6 mounting bolts on a 96,0mm PCD.

Chuck Size Ø135mm
# of Jaws 2
Through Hole Ø33mm
Jaw Stroke Ø5,4mm
Spindle Mounting A4
Maximum Speed 7000rpm
Wedge Stroke 10mm
Maximum Clamping Diameter 135mm
Minimum Clamping Diameter 12mm
Maximum Drawbar Pull 11,7kN (1190kgf)
Maximum Clamping Force 23,9kN (2440kgf)
Moment of Inertia 0,02 kg-m²
Maximum Pressure 2,0MPa (20Kg/cm²)
Weight 7.3Kg

Matching Cylinder TH-536
Matching Hard Jaws HJ05
Matching Soft Jaws SJ04
Matching T Nuts TN1-04

Download Document