Leader Chuck

THROUGH-HOLE POWER CHUCK AG-2H-06-A05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M55 X 2

0MMwith a Ø20mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counter bored for 2x M10 SHCS on 20mm centres. T nut slot width 12mm. Also included are 6x M10 mounting bolts on a 116

0mm PCD.

THROUGH-HOLE POWER CHUCK AG-2H-06-A05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M55 X 2,0MMwith a Ø20mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counter bored for 2x M10 SHCS on 20mm centres. T nut slot width 12mm. Also included are 6x M10 mounting bolts on a 116,0mm PCD.

Chuck Size Ø168mm
# of Jaws 2
Through Hole Ø45mm
Jaw Stroke Ø5.5mm
Spindle Mounting A5
Maximum Speed 6000rpm
Wedge Stroke 12mm
Maximum Clamping Diameter 168mm
Minimum Clamping Diameter 15mm
Maximum Drawbar Pull 14,4kN (1470kgf)
Maximum Clamping Force 37,9kN (3870kgf)
Moment of Inertia 0,06 kg-m²
Maximum Pressure 1,9MPa (19Kg/cm²)
Weight 13.3Kg

Matching Cylinder TH-646
Matching Hard Jaws HJ06
Matching Soft Jaws SJ06
Matching T Nuts TN1-06

Download Document