Leader Chuck

THROUGH-HOLE POWER CHUCK AG-2H-15-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M130 X 2

0MMwith a Ø60mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 22 or 25

5mm. Also included are 3x M10 mounting bolts on a 260

0mm PCD.

THROUGH-HOLE POWER CHUCK AG-2H-15-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened and ground and directly lubricated. This model is a two jaw wedge style power chuck with a large through hole. They come with a blank drawtube connector nut threaded M130 X 2,0MMwith a Ø60mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 22 or 25,5mm. Also included are 3x M10 mounting bolts on a 260,0mm PCD.

Chuck Size Ø381mm
# of Jaws 2
Through Hole Ø120mm
Jaw Stroke Ø10,6mm
Spindle Mounting A11
Maximum Speed 2500rpm
Wedge Stroke 23mm
Maximum Clamping Diameter 381mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 46,9kN (4790kgf)
Maximum Clamping Force 119,6kN (12200kgf)
Moment of Inertia 2,42 kg-m²
Maximum Pressure 1,7MPa (17Kg/cm²)
Weight 122Kg

Matching Cylinder TH-1512
Matching Hard Jaws HJ15H& HJ15P
Matching Soft Jaws SJ15H& SJ15P
Matching T Nuts TN1-15

Download Document