Leader Chuck

THROUGH HOLE POWER CHUCK AG-3H-06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M55 X 2

0mm with a Ø20mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M10 SHCS on 20mm centres. T nut slot width 12mm. Also included are 6x M10 mounting bolts on a 104

8mm PCD.

THROUGH HOLE POWER CHUCK AG-3H-06

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M55 X 2,0mm with a Ø20mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M10 SHCS on 20mm centres. T nut slot width 12mm. Also included are 6x M10 mounting bolts on a 104,8mm PCD.

Chuck SizeØ170mm# of Jaws 3

Through Hole Ø53mm

Jaw Stroke Ø5,5mm

Ø140mmh6

Maximum Speed 6000rpm

Wedge Stroke 12mm

Maximum Clamping Diameter 168mm

Minimum Clamping Diameter 15mm

Maximum Drawbar Pull 21,5kN (2200kgf)

Maximum Clamping Force 56,8kN (5800kgf)

Moment of Inertia 0,06 kg-m²

Maximum Pressure 2,8MPa (28Kg/cm²)

Weight11.0Kg

Matching Cylinder TH-646
Matching Hard Jaws HJ06
Matching Soft Jaws SJ06
Matching T Nuts TN1-06

Download Document