Leader Chuck

THROUGH HOLE POWER CHUCK AG-4H-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a four jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M60 X 2

0mm with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm. Also included are 4xM12 mounting bolts on a 170

0mm PCD

THROUGH HOLE POWER CHUCK AG-4H-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a four jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M60 X 2,0mm with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 25mm centres. T nut slot width 14mm. Also included are 4xM12 mounting bolts on a 170,0mm PCD

Chuck Size Ø210mm
4 of Jaws
Through Hole Ø52mm
Jaw Stroke Ø7,4mm
Ø170mmh6
Maximum Speed 4200rpm
Wedge Stroke 16mm
Maximum Clamping Diameter 210mm
Minimum Clamping Diameter 13mm
Maximum Drawbar Pull 34,3kN (3500kgf)
Maximum Clamping Force 85,8kN (8750kgf)
Moment of Inertia 0,19kg-m²
Maximum Pressure 2,8MPa (28Kg/cm²)
Weight 23.5Kg

Matching Cylinder TH-852
Matching Hard Jaws HJ08
Matching Soft Jaws SJ08
Matching T Nuts TN1-08

Download Document