Leader Chuck

THROUGH HOLE POWER CHUCK AG-4H-18-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a four jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M130 X 2

0mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 23 or 25

5mm. Also included are 3xM10 mounting bolts on a 260

0mm PCD

THROUGH HOLE POWER CHUCK AG-4H-18-A11

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a four jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M130 X 2,0mm with a Ø60mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M20 SHCS on 43mm centres. T nut slot width 23 or 25,5mm. Also included are 3xM10 mounting bolts on a 260,0mm PCD

Chuck Size Ø450mm
4 of Jaws
Through Hole Ø120mm
Jaw Stroke Ø10,6mm
A11
Maximum Speed 1700rpm
Wedge Stroke 23mm
Maximum Clamping Diameter 450mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 71,0kN (7250kgf)
Maximum Clamping Force 179,8kN (18350kgf)
Moment of Inertia 4,85kg-m²
Maximum Pressure 2,4MPa (24Kg/cm²)
Weight 184Kg

Matching Cylinder TH-1512
Matching Hard Jaws HJ15H & HJ15P
Matching Soft Jaws SJ15H & SJ15P
Matching T Nuts TN1-15

Download Document