The TURBOMILL 40B range of electro-permanent chucks are used for 5 side machining, milling, drilling, boring of large moulds, ingots, blacks, frames etc. (minimum workpiece thickness 20mm).
The chucks height of 80mm incorporates a transverse pole division of 40mm of steel alternating with 16mm of epoxy resin the chucks provide a MASSIVE nominal holding force of 180 N/cm².
All TURBOMILL 40B chucks are delivered with 2x part location stops, 4x fixing clamps, a cable junction box (on the long side) and an armoured power cord of 3m..
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.
| Product | Chuck Length mm |
Chuck Width mm |
Chuck Height mm |
Chuck Weight kg |
|
|---|---|---|---|---|---|
| WMG-TB40300346 | 346.0 | 300.0 | 80.0 | 59.0 | More Info |
| WMG-TB40300570 | 570.0 | 300.0 | 80.0 | 95.0 | More Info |
| WMG-TB40400794 | 794.0 | 400.0 | 80.0 | 174.0 | More Info |
| WMG-TB403001018 | 1018.0 | 300.0 | 80.0 | 167.0 | More Info |
| WMG-TB405001018 | 1018.0 | 500.0 | 80.0 | 275.0 | More Info |
| WMG-TB406001018 | 1018.0 | 600.0 | 80.0 | 330.0 | More Info |
Copyright 2025 @ All Rights Reserved. Designed and developed by Multichannelcreative