Leader Chuck

PULL LOCK POWER CHUCK AG-3D-05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M12 with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 0mm. T nut slot width 8 x 8mm. Also included are 3x M10 mounting bolts on a 82

6mm PCD

PULL LOCK POWER CHUCK AG-3D-05

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M12 with a Ø30mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 0mm. T nut slot width 8 x 8mm. Also included are 3x M10 mounting bolts on a 82,6mm PCD

Chuck Size Ø135mm
3 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø5,0mm
Ø110mmh6
Maximum 3500rpm
Wedge Stroke 7mm
Maximum Clamping Diameter 135mm
Minimum Clamping Diameter 21mm
Maximum Drawbar Pull 10,0kN (1020kgf)
Maximum Clamping Force 17,0kN (1730kgf)
Moment of Inertia 0,018kg-m²
Maximum Pressure 2,7MPa (27,5Kg/cm²)
Weight 7.9Kg

Matching Cylinder RK-75
Matching Hard Jaws N/A
Matching Soft Jaws SJ3D-05
Matching T Nuts N/A