Leader Chuck

PULL LOCK POWER CHUCK AG-3D-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M12 SHCS on 26mm. T nut slot width 16 x 12mm. Also included are 6x M12 mounting bolts on a 133

4mm PCD

PULL LOCK POWER CHUCK AG-3D-08

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M20 with a Ø45mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M12 SHCS on 26mm. T nut slot width 16 x 12mm. Also included are 6x M12 mounting bolts on a 133,4mm PCD

Chuck Size Ø210mm
3 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø7,2mm
Ø170mmh6
Maximum 3000rpm
Wedge Stroke 10mm
Maximum Clamping Diameter 210mm
Minimum Clamping Diameter 28mm
Maximum Drawbar Pull 25,0kN (2550kgf)
Maximum Clamping Force 45,0kN (4590kgf)
Moment of Inertia 0,15kg-m²
Maximum Pressure 2,2MPa (22,5Kg/cm²)
Weight 26.0Kg

Matching Cylinder RK-125
Matching Hard Jaws N/A
Matching Soft Jaws SJ3D-08
Matching T Nuts N/A