Leader Chuck

PULL LOCK POWER CHUCK AG-3D-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M27 with a Ø55mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M16 SHCS on 36mm. T nut slot width 20 x 17mm. Also included are 6x M16 mounting bolts on a 171

4mm PCD

PULL LOCK POWER CHUCK AG-3D-12

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M27 with a Ø55mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M16 SHCS on 36mm. T nut slot width 20 x 17mm. Also included are 6x M16 mounting bolts on a 171,4mm PCD

Chuck Size Ø304mm
3 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø10,8mm
Ø220mmh6
Maximum 2000rpm
Wedge Stroke 15mm
Maximum Clamping Diameter 304mm
Minimum Clamping Diameter 50mm
Maximum Drawbar Pull 45,0kN (4590kgf)
Maximum Clamping Force 75,0kN (7650kgf)
Moment of Inertia 0,79kg-m²
Maximum Pressure 2,8MPa (28,5Kg/cm²)
Weight 70.0Kg

Matching Cylinder RK-150
Matching Hard Jaws N/A
Matching Soft Jaws SJ3D-12
Matching T Nuts N/A