Leader Chuck

PULL LOCK POWER CHUCK AG-3D-215

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel

all mating surfaces are hardened

ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M30 with a Ø70mm pilot hole. Fitted with soft blank top jaws as standard

serrated 1

5mm x 60° drilled and counterbored for 2x M26 SHCS on 40mm. T nut slot width 24 x 20mm. Also included are 6x M20 mounting bolts on a 235

0mm PCD

PULL LOCK POWER CHUCK AG-3D-215

These chucks are constructed with high rigidity and high clamping accuracy. Manufactured from high grade alloy steel, all mating surfaces are hardened, ground and directly lubricated. This model is a three jaw wedge style power chuck with a large through hole They come with a blank drawtube connector nut threaded M30 with a Ø70mm pilot hole. Fitted with soft blank top jaws as standard, serrated 1,5mm x 60° drilled and counterbored for 2x M26 SHCS on 40mm. T nut slot width 24 x 20mm. Also included are 6x M20 mounting bolts on a 235,0mm PCD

Chuck Size Ø381mm
3 of Jaws
Through Hole Ø0mm
Jaw Stroke Ø14,5mm
Ø300mmh6
Maximum 1500rpm
Wedge Stroke 20mm
Maximum Clamping Diameter 381mm
Minimum Clamping Diameter 60mm
Maximum Drawbar Pull 53,9kN (5500kgf)
Maximum Clamping Force 90,0kN (9180kgf)
Moment of Inertia 2,25kg-m²
Maximum Pressure 3,4MPa (34,2Kg/cm²)
Weight 132.0Kg

Matching Cylinder RK-150
Matching Hard Jaws N/A
Matching Soft Jaws SJ3D-15
Matching T Nuts N/A