Leader Chuck

WMG-ELEC150300T31

The ELECTROFINE range of electro-magnetic chucks are used for surface grinding of small size (minimum workpiece size 25 x 25 x 3mm) up to large components. Solid single piece body with firmly embedded coils (standard input voltage 110VDC) sit below a solid top plate forming a multi-coil magnetic system assembly with transverse poles. The fine pole division of 3mm of steel alternating with 1mm of brass combine to provide a nominal holding force of 100 N/cm². The regrinding lifespan is 6mm across the range. Custom sizes and chucks with longitudinal poles can be supplied on request. All ELECTROFINE chucks are delivered with back and end part location stops

a set of fixing clamps and a power cord of 3m.. Consult with us a suitable control unit and electrical connection. For more information

see the section control units.

WMG-ELEC150300T31

The ELECTROFINE range of electro-magnetic chucks are used for surface grinding of small size (minimum workpiece size 25 x 25 x 3mm) up to large components.
Solid single piece body with firmly embedded coils (standard input voltage 110VDC) sit below a solid top plate forming a multi-coil magnetic system assembly with transverse poles.
The fine pole division of 3mm of steel alternating with 1mm of brass combine to provide a nominal holding force of 100 N/cm².
The regrinding lifespan is 6mm across the range.
Custom sizes and chucks with longitudinal poles can be supplied on request.
All ELECTROFINE chucks are delivered with back and end part location stops, a set of fixing clamps and a power cord of 3m..
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model - WMG-ELEC150300T31
Chuck Length - 300mm
Chuck Width - 150mm
Chuck Height - 74mm
Chuck Weight - 25.0kg
Pole Division - Steel/Brass 3.0/1.0mmmm
Life span (regrinding limit) - 6mm
Wattage - 77.5w
Standard Input Voltage - 110VDC
Nominal Holding Force - 100 N/cm²
Minimum Workpiece Dimensions - 25 x 25 x 3mm
Brand Name - Walmag

Construction

Solid top plate with transverse poles
Pole division: 3 mm steel and 1 mm brass
Life span (regrinding limit): 6 mm
Multi core magnetic system
Solid piece body with firmly embedded coils
Standard input voltage: 110 VDC
Nominal holding force: 100 N/cm2
Other sizes and voltages can be supplied on request
Electrofine chucks with longitudinal poles can also be supplied

Applications

Surface grinding of small size up to large components
Recommended minimum workpiece size for Electrofine: 25 x 25 x 3 mm

Scope of supply

Back and end stop
Set of clamps
Power cord of 3 m

Download Document