Leader Chuck

WMG-ELEC200400T31

The EPEGRIP magnetic chucks have a solid body with no separate top plate making them low height They are used for general purpose finish grinding operations for range of workpiece sizes (minimum workpiece size 40 x 40 x 6mm)All models have a true transverse pole division of steel and epoxy resin alternating at 14/8mm increments.The nominal holding force is 120 N/cm² across the range.All EPEGRIP chucks are delivered with back and end part location stops

a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.Consult with us a suitable control unit and electrical connection.For more information

see the section control units.

WMG-ELEC200400T31

The EPEGRIP magnetic chucks have a solid body with no separate top plate making them low height They are used for general purpose finish grinding operations for range of workpiece sizes (minimum workpiece size 40 x 40 x 6mm)
All models have a true transverse pole division of steel and epoxy resin alternating at 14/8mm increments.
The nominal holding force is 120 N/cm² across the range.
All EPEGRIP chucks are delivered with back and end part location stops, a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model - WMG-ELEC200400T31
Chuck Length - 400mm
Chuck Width - 200mm
Chuck Height - 74mm
Chuck Weight - 41.0kg
Pole Division - Steel/Brass 3.0/1.0mmmm
Life span (regrinding limit) - 6mm
Wattage - 112w
Standard Input Voltage - 110VDC
Nominal Holding Force - 100 N/cm²
Minimum Workpiece Dimensions - 25 x 25 x 3mm
Brand Name - Walmag

Construction

Solid top plate with transverse poles
Pole division: 3 mm steel and 1 mm brass
Life span (regrinding limit): 6 mm
Multi core magnetic system
Solid piece body with firmly embedded coils
Standard input voltage: 110 VDC
Nominal holding force: 100 N/cm2
Other sizes and voltages can be supplied on request
Electrofine chucks with longitudinal poles can also be supplied

Applications

Surface grinding of small size up to large components
Recommended minimum workpiece size for Electrofine: 25 x 25 x 3 mm

Scope of supply

Back and end stop
Set of clamps
Power cord of 3 m

Download Document