leaderchuck
main-img

WMG-ELEC200500T31

    no image

  • The EPEGRIP magnetic chucks have a solid body with no separate top plate making them low height They are used for general purpose finish grinding operations for range of workpiece sizes (minimum workpiece size 40 x 40 x 6mm)All models have a true transverse pole division of steel and epoxy resin alternating at 14/8mm increments.The nominal holding force is 120 N/cm² across the range.All EPEGRIP chucks are delivered with back and end part location stops
  • a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.Consult with us a suitable control unit and electrical connection.For more information
  • see the section control units.

WMG-ELEC200500T31

Enquiry

The EPEGRIP magnetic chucks have a solid body with no separate top plate making them low height They are used for general purpose finish grinding operations for range of workpiece sizes (minimum workpiece size 40 x 40 x 6mm)
All models have a true transverse pole division of steel and epoxy resin alternating at 14/8mm increments.
The nominal holding force is 120 N/cm² across the range.
All EPEGRIP chucks are delivered with back and end part location stops, a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

  • Model - WMG-ELEC200500T31
  • Chuck Length - 500mm
  • Chuck Width - 200mm
  • Chuck Height - 74mm
  • Chuck Weight - 55.0kg
  • Pole Division - Steel/Brass 3.0/1.0mmmm
  • Life span (regrinding limit) - 6mm
  • Wattage - 166w
  • Standard Input Voltage - 110VDC
  • Nominal Holding Force - 100 N/cm²
  • Minimum Workpiece Dimensions - 25 x 25 x 3mm
  • Brand Name - Walmag


Construction

  • Solid top plate with transverse poles
  • Pole division: 3 mm steel and 1 mm brass
  • Life span (regrinding limit): 6 mm
  • Multi core magnetic system
  • Solid piece body with firmly embedded coils
  • Standard input voltage: 110 VDC
  • Nominal holding force: 100 N/cm2
  • Other sizes and voltages can be supplied on request
  • Electrofine chucks with longitudinal poles can also be supplied

Applications

  • Surface grinding of small size up to large components
  • Recommended minimum workpiece size for Electrofine: 25 x 25 x 3 mm

Scope of supply

  • Back and end stop
  • Set of clamps
  • Power cord of 3 m


  Download Document

  adobe pdf icon

Copyright 2025 @ All Rights Reserved. Designed and developed by Multichannelcreative