Leader Chuck

WMG-ELMA6001500

The ELMAX range of electro-magnetic chucks are used for rough and finish grinding of medium (minimum workpiece size 36 x 10mm and 50 x 50mmrespectively) up to large components.Solid single piece body with firmly embedded coils (standard input voltage 110VDC) sit below a flame cut top plate with epoxy resin gaps forming a waterproof

multi-coil magnetic system assembly with transverse poles. The pole pitch of either 18 or 25mm (depending on the chuck size) provides a nominal holding force of 140 N/cm².Great features the ELMAX include:Optimized Holding Force – power consumption ratio andOptimized Pole Configuration - allows to use the clamping surface up to the edges of the chuck.The regrinding lifespan is 10mm across the range.Custom sizes and voltage chucks can be supplied on request.All ELMAX chucks are delivered with back and end part location stops

a set of fixing clamps and a power cord of 3m..Consult with us a suitable control unit and electrical connection.For more information

see the section control units.

WMG-ELMA6001500

The ELMAX range of electro-magnetic chucks are used for rough and finish grinding of medium (minimum workpiece size 36 x 10mm and 50 x 50mmrespectively) up to large components.
Solid single piece body with firmly embedded coils (standard input voltage 110VDC) sit below a flame cut top plate with epoxy resin gaps forming a waterproof, multi-coil magnetic system assembly with transverse poles. The pole pitch of either 18 or 25mm (depending on the chuck size) provides a nominal holding force of 140 N/cm².
Great features the ELMAX include:
Optimized Holding Force – power consumption ratio and
Optimized Pole Configuration - allows to use the clamping surface up to the edges of the chuck.
The regrinding lifespan is 10mm across the range.
Custom sizes and voltage chucks can be supplied on request.
All ELMAX chucks are delivered with back and end part location stops, a set of fixing clamps and a power cord of 3m..
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model - WMG-ELMA6001500
Chuck Length - 1500mm
Chuck Width - 600mm
Chuck Height - 83mm
Chuck Weight - 530.0Kg
Pole Division - Steel/Epoxy Resin 25.0mm
Pole Pitch - 25mm
Nominal Holding Force - 140 N/cm²
Minimum Workpiece Dimensions - 50 x 15mm
Standard Input Voltage - 110VDC
Wattage - 505w
Brand Name - Walmag

Construction

Flame cut top plate with epoxy resin gaps
Life span (regrinding limit): 10 mm
Pole pitch: 18 and 25 mm depending on chuck size
Solid body with firmly embedded coils
Watertight assembly
Optimized holding force – power consumption ratio
Standard input voltage: 110 VDC
Nominal holding force: 140 N/cm2
Other sizes and voltages can be supplied on request

Applications

Rough and finish grinding of medium to large size components
The pole configuration allows to use the clamping surface up to the edges of the chuck
Recommended minimum component size: 36 x 10 and 50 x 15 mm respectively

Scope of supply

Back and end stop
Set of clamps
Power cord of 3 m

Download Document