Leader Chuck

WMG-EPEFD1000

The EM-FINE is a range of electromagnetic chucks used for the finish series grinding of small and thin (minimum 15 x 2mm) workpieces. The waterproof assembly comprises a solid machined body with firmly embedded coils and permanent magnets beneath a robust top plate with parallel poles with a standard pitch of 5mm (4mm of steel alternating with 1mm of brass or epoxy resin) with a standard electrical connector located at the bottom centre. The nominal holding force generated is 100 N/cm². Consult with us a suitable control unit and electrical connection. For more information

see the section control units.

WMG-EPEFD1000

The EM-FINE is a range of electromagnetic chucks used for the finish series grinding of small and thin (minimum 15 x 2mm) workpieces. The waterproof assembly comprises a solid machined body with firmly embedded coils and permanent magnets beneath a robust top plate with parallel poles with a standard pitch of 5mm (4mm of steel alternating with 1mm of brass or epoxy resin) with a standard electrical connector located at the bottom centre. The nominal holding force generated is 100 N/cm². Consult with us a suitable control unit and electrical connection. For more information, see the section control units.

Model - WMG-EPEFD1000
Chuck Diameter - Ø1000mm
Chuck Height - 105mm
Chuck Weight - 553.0kg
Pole Division Steel/Brass or Epoxy Resin - 5mm (4-1mm)
Nominal Holding Force - 100 N/cm²
Brand Name - Walmag

Construction

Robust top plate with parallel poles
Standard pole pitch 5 mm (4 mm steel + 1 mm brass or epoxy)
Solid machined body with firmly embedded coils
Waterproof assembly
Standard electrical connection from centre bottom
Standard input voltage: 110 VDC
Nominal holding force: 100 N/cm2

Application

Mass grinding of small and thin workpieces
Minimum workpiece thickness and length 2 x 15 mm

Download Document