Leader Chuck

WMG-POWE300600

The POWERFINE magnetic chucks have no separate top plate making them the economists choice! (They offer the best cost:quality ratio). They are used for general purpose finish grinding operations for range of workpiece sizes (minimum 30 x 30 x 4mm)All models have a transverse pole division of steel and epoxy resin alternating at 7/6/7/4mm increments.The nominal holding force is 110 N/cm² across the range.All POWERFINE chucks are delivered with back and end part location stops

a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.Consult with us a suitable control unit and electrical connection.For more information

see the section control units.

WMG-POWE300600

The POWERFINE magnetic chucks have no separate top plate making them the economists choice! (They offer the best cost:quality ratio). They are used for general purpose finish grinding operations for range of workpiece sizes (minimum 30 x 30 x 4mm)
All models have a transverse pole division of steel and epoxy resin alternating at 7/6/7/4mm increments.
The nominal holding force is 110 N/cm² across the range.
All POWERFINE chucks are delivered with back and end part location stops, a set of fixing clamps and power cord of 3m. For sizes =>300 x 600mm studs are included to aid handling.
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

Model - WMG-POWE300600
Chuck Length - 600mm
Chuck Width - 300mm
Chuck Height - 79mm
Chuck Weight - 159.0kg
Pole Division - Steel/Epoxy Resin 7.0/6.0/7.0/4.0mm
Pole Distance - 24.0mm
Life span (regrinding limit) - 6mm
Nominal Holding Force - 110 N/cm²
Minimum Workpiece Thickness - 4mm
Minimum Workpiece Length - 30mm
Control Unit - BUR10
Brand Name - Walmag

Construction

Powerfine and Epegrip magnetic chucks have no separate top plate
Powerfine chucks offer the best cost/quality ratio
Transverse pole division, steel/epoxy resin 7/6/7/4 mm
Nominal holding force 110 N/cm2

Application

General purpose finish grinding
Minimum workpiece thickness: 4 mm
Minimum workpiece length: 30 mm

Scope of supply

Back and end stop
Set of clamps
Power cord of 3 m
Sizes 300 x 600 mm and bigger have studs for handling

Download Document