leaderchuck
main-img

WMG-TB405001018

    no image

  • The TURBOMILL 40B range of electro-permanent chucks are used for 5 side machining
  • milling
  • drilling
  • boring of large moulds
  • ingots
  • blacks
  • frames etc. (minimum workpiece thickness 20mm).The chucks height of 80mm incorporates a transverse pole division of 40mm of steel alternating with 16mm of epoxy resin the chucks provide a MASSIVE nominal holding force of 180 N/cm².All TURBOMILL 40B chucks are delivered with 2x part location stops
  • 4x fixing clamps
  • a cable junction box (on the long side) and an armoured power cord of 3m..Consult with us a suitable control unit and electrical connection.For more information
  • see the section control units.

WMG-TB405001018

Enquiry

The TURBOMILL 40B range of electro-permanent chucks are used for 5 side machining, milling, drilling, boring of large moulds, ingots, blacks, frames etc. (minimum workpiece thickness 20mm).
The chucks height of 80mm incorporates a transverse pole division of 40mm of steel alternating with 16mm of epoxy resin the chucks provide a MASSIVE nominal holding force of 180 N/cm².
All TURBOMILL 40B chucks are delivered with 2x part location stops, 4x fixing clamps, a cable junction box (on the long side) and an armoured power cord of 3m..
Consult with us a suitable control unit and electrical connection.
For more information, see the section control units.

  • Model - WMG-TB405001018
  • Chuck Length - 1018mm
  • Chuck Width - 500mm
  • Chuck Height - 80mm
  • Chuck Weight kg - 275kg
  • Control Unit - WMG.BFR.10
  • Minimum Workpiece Thickness - 20mm
  • Pole Division - Steel/Epoxy Resin 40/16mm
  • Life span (regrinding limit) - 5mm
  • Nominal Holding Force - 170 N/cm²
  • Minimum Workpiece Thickness - 20mm
  • Control Unit - BFR10
  • Brand Name - Walmag

Construction

  • Transverse poles, pole division 40 mm of steel, 16 mm of epoxy resin
  • Chuck height: 80 mm
  • Nominal holding force: 180 N/cm2

Application

  • Five sided machining
  • Milling
  • Drilling
  • Boring of large molds, ingots, blocks, frames, etc.
  • Recommended minimum workpiece thickness: 20 mm.

Scope of supply

  • Stoppers on 2 sides
  • Cable junction box on long side
  • 3 m long armoured cable
  • 4 chuck clamps


  Download Document

  adobe pdf icon

Copyright 2025 @ All Rights Reserved. Designed and developed by Multichannelcreative